YK Series Tools Rod[ Supply ]
| Description: |
 |
Grade
YG10F
YK15
YK20
YK25A
Content of cobalt(Co%)
9.0
10.0
10.0
12.0
Grain size(μm)
0.7
0.7
0.6
0.5
Density(g/cm3)
14.6
14.5
14.5
14.2
Hardness(HRA)
91.3
91.3
91.8
92.5
Hardness(HV30)
1580
1580
1660
1750
TRS(N/mm2)
3800
4000
4100
4300
Product Mark
Recommended Application
YG10F
It is applicable for milling and drilling of steel, castings and aluminum alloy with the Rockwell Hardness below 45. It is recommended to be used for making overall cemented carbide tools such as twist bit and end mill.
YK15
It is high in universality and red hardness. It is applicable for low-speed milling and drilling of steel, aluminum alloy, etc. with the Rockwell Hardness below 45. It is recommended to be used for making overall cemented carbide tools such as twist bit and end mill.
YK20
The YK15 improved type is applicable for milling and drilling of steel, castings, stainless steel, aluminum alloy, etc. with the Rockwell Hardness below 50. It is recommended to be used for making general drill bits, milling cutters, reamers and screw taps.
YK25
It is applicable for milling of titanium alloy, high-hardness aluminum alloy, quenched steel, heat-resistant alloy, stainless steel, glass fiber reinforced plastics, etc. with the Rockwell Hardness below 55. It is recommended to be used for making high-speed milling cutters and end mills and reamers of various specifications. |
 |
|
|
| Contact
us |
|
|
Company: |
Nanchang Cemented Carbide Limited Liability Company |
|
Address: |
1173, Shuanggang East Avenue, Nanchang Economic and Technological Development Zone, Jiangxi ,China |
|
Phone: |
86-791-83888247 |
|
Fax: |
86-791-83887653 |
Email: |
ncc@chinancc.com.cn |
|
WebSite: |
http://en.chinancc.com.cn/ |
|
Contact: |
Li Jianping |
|
Zip/Postal Code: |
|
|
|
|
Co Powder
